ESB 3.6K3U

  • 399.00€

  • Kaina be PVM: 329.75€
Kiekis

2-Way Mid-High Unit

Main Features

– This special and exclusive component driver is a concept conceived way back in 1970’s. Its aim is to concentrate medium and tweeter emissions in a single virtual point. This minimizes phase delays and irregularities at the crossover point.
– The neodymium magnet is high grade type to eliminate magnetic losses at elevated temperatures and to concentrate more force in less space.
– The tweeter has a silk-impregnated, thin fabric dome diaphragm for a smooth sound, with an outer suspension covered with a high-loss damping material to eliminate edge vibration and resonance.
– Pressed paper cone with waterproof treatment (midrange) for the ideal marriage between lightness, stiffness and the ability of the cone to dampen any unwanted vibration.
– The voice coil uses an aluminum support and a double layer winding technology of copper wire with an aluminum core.

Technical Specifications

– Nominal Impedance: 4 Ohm
– Nominal Power: 60 (mid), 80 (tw) W
– Transient Power: 120 (mid), 160 (tw) W
– Frequency Response: 130 Hz ~ 25 KHz
– Sensitivity: 86 (mid), 91 (tw) dB 2.83v/1m

6.5″/165 mm Mid-Woofer

Main Features

– ABS basket reinforced with fiberglass. The basket has been engineered to obtain the maximum in terms of torsional rigidity (resistance to bending), but at the same time, offers the minimum resistance to air passage.
– Pressed paper cone with waterproof treatment. It is widely recognized that cones made of paper are the ideal marriage between lightness, stiffness and the ability of the cone to dampen any unwanted vibration (read: distortion).
– High damping, single wave rubber surround. The Perbunan® rubber edge is much more stable with temperature changes than standard rubber.
– The 25 mm voice coil uses an aluminum support with a double layer winding technology of copper wire with an aluminum core.
– High grade ferrite magnet, a type of magnet with significantly higher performance than “standard” magnets.

Technical Specifications

– Nominal Impedance: 4 Ohm
– Nominal Power Handling: 120 Watt
– Transient Power: 240 Watt
– Frequency Response: 65 Hz ~ 9 KHz
– Sensitivity: 91.5 dB 2.83v/1m

Susiję produktai

ALPINE SXE-1750S

ALPINE SXE-1750S

Alpine SXE-1750S 6-1/2″ (16.5cm DIN) komponentiniai 2-jų juostų garsiakalbiai

56.00€ Kaina be PVM: 46.28€
ESB 8.6 K2

ESB 8.6 K2

Komplektas susideda iš šių garsiakalbių 8.028S 1.1″/28 mm Dome Tweeter Į produktą..

1,498.98€ Kaina be PVM: 1,238.83€
ALPINE SPG-13CS

ALPINE SPG-13CS

SPG-13CS – 5-1/4” (13cm) komponentiniai 2-jų juostų garsiakalbiai   Sukurti didelei galiai. Naujos..

86.01€ Kaina be PVM: 71.08€
GROUND ZERO GZRC 165/28-IV SQ

GROUND ZERO GZRC 165/28-IV SQ

GZRC 165/28-IV SQ is a successor of GZRC Anniversary-25 speaker system. It has Klippel optimized 6,5..

248.99€ Kaina be PVM: 205.78€