MARK LEVINSON 526 PRADINIS STIPRINTUVAS DAC PURE PHONO 2 X TOSLINK 1 USB-B 2X RCA BALANSUOTA XLR JUNGTIS

Gamintojas: MARK LEVINSON
Kategorijos: KOREKCINIAI STIPRINTUVAI, FONOKOREKTORIAI PATEFONAI IR JŲ PRIEDAI NAMŲ GARSO APARATŪRA

19,999.00€
Kaina be PVM: 16,528.10€

SAVYBĖS

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path
32-bit Precision Link DAC with three selectable filters and seven power supplies
Supports high-resolution PCM (up to 32-bit, 192kHz) and DSD (up to 5.6MHz)

Discrete, balanced R-2R Ladder volume control for precision and performance
Class-A Main Drive Headphone output for up to 32-ohm headphones using main circuit
Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Class-A Pure Phono stage with physically separated channels for MC and MM
12 analog, digital, and phono inputs; balanced, single-ended, and headphone outputs
Designed and handcrafted in the USA

SPECIFIKACIJOS

Line stage gain, normal gain setting	13.5dB balanced; 7.5dB single-ended
Line stage frequency response, 20Hz to 20kHz	±0.02dB
Line stage frequency response, 0.4Hz to 370kHz	+0.1 / -3dB
THD+N @ 1kHz (2VRMS single-ended or 4VRMS balanced output)	<0.003%
Signal-to-noise ratio (ref. to 2VRMS single-ended or 4VRMS balanced, max vol)	>115dB @ 1kHz
Crosstalk @ 1kHz	<-107dB
Channel separation	below noise floor (>115dB @ 1kHz)
Input impedance	>45kΩ
Output impedance	<80Ω single ended, <160Ω balanced
Maximum input level, normal gain setting	>10VRMS, single ended, >15VRMS, balanced
Maximum output level	>11VRMS single ended, >22VRMS balanced
Headphone output impedance	selectable; <3Ω or 75Ω
Headphone maximum output, low impedance setting, 30Ω (0.3W), 20 to 20kHz, <0.1% THD	>3VRMS
Headphone maximum output, low impedance setting, 300Ω, 20Hz to 20kHz, <0.1% THD	>9VRMS
Headphone THD+N, 20Hz to 20kHz, 2V RMS	<0.03% @ 30Ω, <0.01% @ 300Ω
RIAA frequency response	20Hz to 20kHz, ±0.3dB
Infrasonic filter	defeatable, 15Hz, 2nd order (12dB/octave)
DAC output voltage @ full scale (0dBFS)	3.7VRMS
DAC frequency response	20Hz to 20kHz, +0 / ¬–0.2dB
DAC THD, full scale (0dBFS)	<0.0001% @ 1kHz, <0.0003% @ 20kHz
DAC SNR (referred to 3.7VRMS / 0dBFS output)	>120dB (A-weighted)
PCM sample rates/bit depth	32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits
DSD	Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)
Analog inputs	2 balanced (XLR), 3 single-ended (RCA) line, 1 single-ended (RCA) phono w/ ground
Digital inputs	1 balanced (XLR); 2 coaxial (RCA); 2 optical (Toslink); 1 USB-B asynchronous
Analog outputs	1 balanced (XLR); 1 pair single-ended (RCA), 1 headphone (¼”, 6.3mm TS)
Control connectors	Ethernet (RJ45), RS-232 (RJ12), Trigger In and Out, IR In, USB-A, Mini USB
Mains voltage	100VAC, 115VAC, or 230VAC, factory set
Power consumption	0.4W Green Standby, 5W Power Save, 72W Normal Standby, 75W On, idle
Dimensions (WxDxH)	17.25” x 18” x 3.75”
Weight	41 lbs.
MOVING MAGNET MODE
Input resistance	47kΩ
Input capacitance	selectable; 50, 100, 150, 200, or 680pF
Gain	40dB @ 1kHz
THD+N, 20Hz to 20kHz, 2VRMS output	<0.03%
MOVING COIL MODE
Input resistance	selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47kΩ
Input capacitance	50pF
Gain	selectable; 50, 60, or 70dB @ 1kHz
THD+N, 20Hz to 20kHz, 2VRMS output	<0.02%, 50 or 60dB settings, <0.04, 70db setting