AUDIO-TECHNICA AT-LP3XBT PLOKŠTELIŲ GROTUVAS / PATEFONAS PILNAI AUTOMATINIS SU FONOKOREKTORIUM IR BLUETOOH

PILNAI AUTOMATINIS PATEFONAS

• FULLY AUTOMATIC BELT-DRIVE STEREO TURNTABLE WITH UNIVERSAL TONEARM & HEADSHELL

• Fully Automatic Belt-Drive system
• Specially designed AT-VM95C phono cartridge
• Removable universal AT-HS3 headshell
• Balanced straight tonearm
• Switchable MM & MC modes
• 33⅓ & 45 RPM selectable speeds

• Išmatavimai	435 mm ×353 mm×128 mm (W×D×H)
  Svoris	5.2kg

• Produkto savybės

  

  • ADVANCED FULLY-AUTOMATIC BELT-DRIVE TURNTABLE

    A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT-VM95C Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

    • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
    • Balanced straight tonearm with hydraulically damped lift control and lockable rest
    • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
    • Switchable modes for moving magnet and moving coil cartridges
    • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
    • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
    • Damped base construction for reduced low-frequency feedback colouration
     

    MM / MC CARTRIDGE SELECTOR SWITCH

    Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.

    The LP3XBT is based on the AT-LP3, but incorporates a host of exciting new features and capabilities including:

    • Bluetooth® connection
    • High-quality Qualcomm® aptX™ audio codec
    • The AT-VM95C cartridge, which is compatible with any of Audio-Technica‘s VM95 Series replacement styli
    • An external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain to produce crystal clear audio

    The LP3XBT is the ideal turntable for fans of the LP3 looking to bring the convenience of Bluetooth® listening to their setup, giving you the same rich sound experience with enhanced

    

    UNIVERSAL HEADSHELL

    Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2" mount cartridges and 4-pin turntable arms.

    

    BALANCED TONEARM

    Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.

    

    4.5MM PLATTER MAT

    Reducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.

    Turntable
    Type	Fully Automatic, Belt-Drive
    Motor	DC motor
    Speeds	33-1/3 RPM, 45 RPM
    Turntable Platter	Die-cast aluminium
    Wow and Flutter	Less than 0.2% WRMS (33 1/3 RPM) at3kHz
    Signal-to-Noise Ratio	> 60 dB
    Output Level	“PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec  “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
    Phono Pre-Amp Gain	36dB nominal, RIAA equalised 56dB nominal, RIAA equalised
    Power Supply Requirements	220 to 240 V / 50, 60 Hz
    Power Consumption	2W
    Išmatavimai	435 mm ×353 mm×128 mm (W×D×H)
    Weight	5.2kg
    Accessories Included	Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable

    Cartridge & Stylus
    Model	AT91R
    Type	VM Dual Magnet
    Output Voltage	3.5mV (mV at 1kHz, 5 cm/sec)
    Vertical Tracking Force Range	1.5 to 2.5g (standard 2.0g)
    Stylus Construction	0.6 mil bonded conical
    Cantilever	Aluminium pipe
    Recommended Load Impedance	47,000 ohms
    Weight	5.0g

    Headshell
    Model	AT-HS3
    Weight	11.1g
    Overhang Adjustment	8mm

    Tone arm
    Type	Static balanced straight shaped with soft damping control
    Effective Length	221.5mm
    Overhang	19mm
    Maximum Tracking Error Angle	Less than 3°
    Stylus Pressure Adjustment Range	1 to 4g
    Applicable Cartridge Weight	14.5 to 20g
    Anti-skating Range	0 - 3 g

    AT-LP3XBT

    The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

    Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

    Analogue or Bluetooth® Connectivity

    High-Fidelity Audio

    The LP3XBT connects seamlessly to a wide array of Bluetooth® compatible devices, including speakers and headphones. Its compatibility with the high-quality Qualcomm® aptX™ audio codec ensures exceptional sound reproduction when using the LP3XBT.

    For vinyl enthusiasts looking to replicate the distinct, warm sounds of analogue audio, the AT-LP3XBT can also be used as a wired turntable.

    Bluetooth® Wireless or Wired Listening

    AT-VM95C Dual Magnet Phono Cartridge

    Built-in Switchable Phone Pre-Amplifier

    Plays 33⅓ and 45 RPM Records

    Easy Operation

    Simple to Setup

    Automatic operation is a superb choice for those looking for an easy-to-use turntable setup. Play, stop, and change rotation speeds with ease. With a hydraulically damped lift control and lockable rest, all you need to do is lower the balanced straight tonearm into position and allow your turntable to work its magic.

    The LP3XBT plays two speeds: 33⅓, and 45 RPM.

    
    Quality Components and Sophisticated Design

    Refine Your Sound

    The tonearm’s removable AT-HS3 universal headshell and dual moving magnet cartridge allows you to experiment with your cartridge choice to find the perfect sound to suit your listening preferences. The AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

    Quality Components and Sophisticated Design

    Style and Substance

    The damped base construction provides reduced low-frequency feedback coloration, while the die-cast aluminium platter with a felt mat controls resonance to reduce unwanted vibration.

    AT-LP3XBT is available in two classic colours – black or white.

    Comparing AT-LP3 and the AT-LP3XBT

    What’s the Difference?

    The LP3XBT is based on the AT-LP3, but incorporates a host of exciting new features and capabilities including:

    • Bluetooth® connection
    • High-quality Qualcomm® aptX™ audio codec
    • The AT-VM95C cartridge, which is compatible with any of Audio-Technica‘s VM95 Series replacement styli
    • An external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain to produce crystal clear audioA Passion for Listening

    60 Years of Analogue Audio

    Audio-Technica has developed cartridge and turntable technology for over 60 years. We are passionate about the art of analogue listening, and we are proud to produce some of the most critically acclaimed and popular audio products in the world.