MARK LEVINSON 526 PRADINIS STIPRINTUVAS DAC PURE PHONO 2 X TOSLINK 1 USB-B 2X RCA BALANSUOTA XLR JUNGTIS

MARK LEVINSON 526 PRADINIS STIPRINTUVAS DAC PURE PHONO 2 X TOSLINK 1 USB-B 2X RCA BALANSUOTA XLR JUNGTIS

  • 19,999.00€

  • Kaina be PVM: 16,528.10€
Kiekis

SAVYBĖS

  • Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path
  • 32-bit Precision Link DAC with three selectable filters and seven power supplies
  • Supports high-resolution PCM (up to 32-bit, 192kHz) and DSD (up to 5.6MHz)
  • Discrete, balanced R-2R Ladder volume control for precision and performance
  • Class-A Main Drive Headphone output for up to 32-ohm headphones using main circuit
  • Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers
  • Class-A Pure Phono stage with physically separated channels for MC and MM
  • 12 analog, digital, and phono inputs; balanced, single-ended, and headphone outputs
  • Designed and handcrafted in the USA

SPECIFIKACIJOS

Line stage gain, normal gain setting 13.5dB balanced; 7.5dB single-ended
Line stage frequency response, 20Hz to 20kHz ±0.02dB
Line stage frequency response, 0.4Hz to 370kHz +0.1 / -3dB
THD+N @ 1kHz (2VRMS single-ended or 4VRMS balanced output) <0.003%
Signal-to-noise ratio (ref. to 2VRMS single-ended or 4VRMS balanced, max vol) >115dB @ 1kHz
Crosstalk @ 1kHz <-107dB
Channel separation below noise floor (>115dB @ 1kHz)
Input impedance >45kΩ
Output impedance <80Ω single ended, <160Ω balanced
Maximum input level, normal gain setting >10VRMS, single ended, >15VRMS, balanced
Maximum output level >11VRMS single ended, >22VRMS balanced
Headphone output impedance selectable; <3Ω or 75Ω
Headphone maximum output, low impedance setting, 30Ω (0.3W), 20 to 20kHz, <0.1% THD >3VRMS
Headphone maximum output, low impedance setting, 300Ω, 20Hz to 20kHz, <0.1% THD >9VRMS
Headphone THD+N, 20Hz to 20kHz, 2V RMS <0.03% @ 30Ω, <0.01% @ 300Ω
RIAA frequency response 20Hz to 20kHz, ±0.3dB
Infrasonic filter defeatable, 15Hz, 2nd order (12dB/octave)
DAC output voltage @ full scale (0dBFS) 3.7VRMS
DAC frequency response 20Hz to 20kHz, +0 / ¬–0.2dB
DAC THD, full scale (0dBFS) <0.0001% @ 1kHz, <0.0003% @ 20kHz
DAC SNR (referred to 3.7VRMS / 0dBFS output) >120dB (A-weighted)
PCM sample rates/bit depth 32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits
DSD Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)
Analog inputs 2 balanced (XLR), 3 single-ended (RCA) line, 1 single-ended (RCA) phono w/ ground
Digital inputs 1 balanced (XLR); 2 coaxial (RCA); 2 optical (Toslink); 1 USB-B asynchronous
Analog outputs 1 balanced (XLR); 1 pair single-ended (RCA), 1 headphone (¼”, 6.3mm TS)
Control connectors Ethernet (RJ45), RS-232 (RJ12), Trigger In and Out, IR In, USB-A, Mini USB
Mains voltage 100VAC, 115VAC, or 230VAC, factory set
Power consumption 0.4W Green Standby, 5W Power Save, 72W Normal Standby, 75W On, idle
Dimensions (WxDxH) 17.25” x 18” x 3.75”
Weight 41 lbs.
MOVING MAGNET MODE
Input resistance 47kΩ
Input capacitance selectable; 50, 100, 150, 200, or 680pF
Gain 40dB @ 1kHz
THD+N, 20Hz to 20kHz, 2VRMS output <0.03%
MOVING COIL MODE
Input resistance selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47kΩ
Input capacitance 50pF
Gain selectable; 50, 60, or 70dB @ 1kHz
THD+N, 20Hz to 20kHz, 2VRMS output <0.02%, 50 or 60dB settings, <0.04, 70db setting

Susiję produktai