YAMAHA XDA-AMP5400RK MULTI-ROOM STIPRINTUVAS (4 ZONOS 8 KANALAI) RCA: 4 AUDIO SENSE DISABLE: 0.3 W, AUDIO SENSE ENABLE / MODE STANDBY: 0.5W

Gamintojas: YAMAHA
Kategorijos: NAMŲ KINO STIPRINTUVAI GARSO STIPRINTUVAI BEI GROTUVAI NAMAMS NAMŲ GARSO APARATŪRA

1,499.00€
Kaina be PVM: 1,238.84€

The Perfect Whole Home Audio Companion

Sonic Soul Mates

The XDA-AMP5400RK – the “AMP” – was conceived as a companion to the Yamaha XDA-QS5400RK as a way to provide additional speaker coverage and/or additional speaker output power in a custom integrated multi-room home audio system. It also pairs nicely with Yamaha AV receivers that offer Zone pre outs.

XDA-QS5400RK

Slim Yet Powerful

The AMP packs eight channels of audiophile-grade amplification into a remarkably-slim 1U-high enclosure, allowing you to fully optimise your valuable rack real estate.

Phenomenal Flexibility

Feed up to four sources from QS pre outs into the AMP – its four audio I/O buses can be patched together to handle a wide array of speaker/zone configurations. The AMP comes with a set of jumper plugs and cables, making it ultra-versatile right out of the box. The audio outs can alternatively be used to connect powered subwoofers or subwoofer amps.

More Power on Demand

Each of the four amplifier zones is also bridgeable, giving you the option to increase power output to select speakers if needed.

Engineered to Sound Extraordinary

Audiophile-Grade Amplification

The AMP employs ultra-efficient ICEpower integrated circuits to deliver eight channels of pristine, musically-dynamic digital amplification 50 watts/channel (8 ohms) with an outstanding 5 Hz to 40 kHz (+0/-3 dB) frequency response and 108 dB signal-to-noise ratio. It is 4 ohm capable at 100 watts/channel and bridgeable to 200 watts/channel (8 ohms).

Goodbye Ground Loop Hum

The curse of the custom integrator: ground loop hum, a common and vexing side effect of connecting a bunch of electronics together in a rack. The AMP takes care of it with a brilliantly-engineered differential circuit design. Sometimes it’s what you don’t hear that sounds the most amazing.

High-Performance under the Hood

The AMP employs a balanced audio circuit design and PML capacitors, which are also used in our flagship AVENTAGE AV separates. The result: greater realism and expressiveness for all of your favourite music.

Custom-Built for Custom

Versatile Installation

Mount it in a rack with the included ears or remove the ears for shelf installations. The included magnetic faceplate discourages tampering and provides the perfect cosmetic finish.

Harmonious Control

When a QS and AMP are used together, simply wire the trigger ports to automatically power on/off the desired amplifier zones – no additional control interface is needed. The AMP also works great as a companion to an AVENTAGE AV receiver. When using the AMP with other sources, audio sensing inputs and an infrared I/O provide additional control flexibility.

Custom-Friendly Connectivity

The AMP is truly made for custom integration, with Euroblock-style speaker connectors and a detachable AC cable for smart connectivity.

Three Ways to Handle External Sources

In addition to supporting external sources through linking with MusicCast receivers and sound bars, the QS offers an Aux input that can be selected for playback in any zone and a Cut-In input that automatically senses an input signal and temporarily overrides the selected source. This gives you flexibility to integrate media players, CD changers or even paging systems. Thru-Outs let you set up a bus to additional QS units.

Specifikacijos

	XDA-AMP5400RK
Multi-Room Amplifier
Audio Specifications	Channel	8 channel (2 channel x 4)
Minimum Speaker load Capability	4 ohm
BTL Connection	Yes
Speaker Output Terminal	4 (Euroblock)
Audio Input Terminal	RCA: 4
Audio Output Terminal	RCA (2-ch through out): 4
Trigger In / Out	4 / 4
Remote In / Out	1 / 1
Rated Output Power (1 kHz, 0.9% THD, 2ch driven)	Normal (4 / 8 ohms): 90 / 50 W, Bridge (8 ohms): 100 W
Rated Output Power (1 kHz, 0.9% THD, 1ch driven)	Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W
Dynamic Power (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst)	Normal (4 / 8 ohms): 80 / 40 W, Bridge (8 ohms): 150 W
Dynamic Power (1 kHz, 0.9% THD, 2ch driven, 20 ms burst)	Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W
Dynamic Power (1 kHz, 0.9% THD, All ch driven, 20 ms burst)	Normal (4 / 8 ohms): 80 / 50 W, Bridge (8 ohms):170 W
Maximum Effective Output Power	[1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W
Total Harmonic Distortion	[SP OUT, 20 Hz-20 kHz, 25 W, 8 ohm] 0.04%
Frequency Response	[1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz
Channel Separation	[SP OUT, 1 kHz / 10 kHz] 78 dB / 62 dB
Signal to Noise Ratio	[SP OUT AUX IN] 108 dB
Maximum Input Signal	[PRE OUT L / R, 0.9% THD] 1 V
Gain	[SP OUT 1 V Input] 25.8 dB
Input Sensitivity	[1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V
General	Power Consumption	130 W, [All Zone On] No Signal Condition: TBD, [All Zone Off] Audio Sense On: 14.8 W
Standby Power Consumption	Audio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W
Power Management (Auto Power Standby)	Yes (On / Off)
Dimension (W × H × D) mm	[Table Top Mount with Adhesive Feet] 437 x 46 x 443 mm; 17-1/4” x 1-3/4” x 17-3/8”, [Table Top Mount with Adhesive Feet and Faceplate] 437 x 46 x 453 mm; 17-1/4” x 1-3/4” x 17-7/8”, [Rack Mount] 481 x 44 x 443 mm; 18-7/8” x 1-3/4” x 17-3/8”, [Rack Mount with Faceplate] 481 x 44 x 453 mm; 18-7/8” x 1-3/4” x 17-7/8”
Weight	6.0 kg; 13.2 lbs.