BLAZE POWERZONE CONNECT 122D, 2 KANALŲ STIPRINTUVAS SU DANTE 125 W
- Gamintojas: BLAZE
- Kategorijos: 100V STIPRINTUVAI STIPRINTUVAI NAMAMS
-
879.00€
- Kaina be PVM: 726.45€
Blaze PowerZone Connect 122D - 125 W DSP 2 kanalų D klasės stiprintuvas su Dante integracija, skirtas profesionalioms garso instaliacijoms. Šis kompaktiškas įrenginys su pilna DSP konfigūracija per PowerZone™ Control web programėlę suteikia lankstų ir patikimą garso valdymą tiek Lo-Z, tiek Hi-Z režimu.
Kompaktiškas dizainas: Puikiai tinka ribotoms erdvėms.
Integruotas DSP valdymas: Išsamus DSP konfigūravimas per integruotą web programėlę.
Dante™ Ultimo™ palaikymas: Integruotas 4×4 Dante lustas (4 kanalai).
Hibridinis maitinimo paskirstymas: Veikia tiek Lo-Z, tiek Hi-Z sistemose.
Galinga technologija: Varomas Pascal UMAC™ Class-D technologija.
Lankstus galios dalijimas: Galios paskirstymas tarp išvesties kanalų.
Išplėstinė jungtis: S/PDIF įvestis/išvestis ir konfigūruojamos GPIO jungtys.
Aplinkos reikalavimų atitiktis: Atitinka ErP ir Energy Star standartus, sertifikuotas UL.
Universalus maitinimo šaltinis: UREC™ su PFC.
APRAŠYMAS
PowerZone™ Connect 1U series
The PowerZone™ Connect 1U series is a line of DSP-enabled Class-D amplifiers designed to simplify the lives of system installers, providing unmatched reliability, efficiency, and exceptional system configuration. Their compact form factor makes them an ideal choice for audio/voice installation projects with limited space constraints, demanding high-output performance of up to 1000 W. The 1U family powers both conventional low-impedance (4 Ω to 16 Ω) loudspeakers and constant voltage (70 V/100 V) transformer-coupled loudspeakers, and features automatic power-sharing technology for proportional distribution in both Lo-Z and Hi-Z modes.
Specific models of the PowerZone™ Connect 1U amplifiers offer compatibility with Audinate Dante™ AoIP networks and installations. Our intuitive PowerZone™ Control web app is built into all our PowerZone™ Connect amplifiers for easy system setup. PowerZone™ Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multizone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.
TECHNINIAI DUOMENYS
Total System Power
125 W
Output Power @ 4/8Ω
2 x 60 W
Output Power @ 70/100V*
1 x 125 W
Powershare (up to) Across all channels**
1 x 125 W
Power Consumption
75 W
Dimensions
44 x 220 x 213 mm
1.7 x 8.7 x 8.4 in
Weight
2kg, 4.4 lbs
Output Circuitry
UMAC™ Class D – full bandwidth PWM modulator with ultra-low distortion
Output Voltage
45Vrms (S.E) – 70/100V (Hi-Z)
Signal To Noise-Ratio
> 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load)
THD+N (typical)
< 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)
Frequency Response
20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power)
Protection Circuits
Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
Power Supply
UREC™ universal mains switch mode power supply with Power Factor Correction (PFC)
and integral standby converter
Operating Voltage/Frequency.
Universal Mains, 100-240V, 50-60Hz
Operating temperature
0-40°C
Standby Consumption
< 0.5 W (Energy Star & ErP 1275/2008/EC compliant)
Power Ratings
1% THD @ 120VAC and 230VAC
features
2 Channels, Dante






